通过AT命令与手机互动开发指南(二)

来源: BlogBus 原始链接: http://3c.c.blogbus.com:80/logs/2006/01/1807642.html 存档链接: https://web.archive.org/web/20060210015817id_/http://3c.c.blogbus.com:80/logs/2006/01/1807642.html

软件下载 | 本站原创 手机病毒 | 操作系统 手机编程 | 信息通信 关于本站 | 友情连接 << 短消息业务系统的架构与协议 | 返回首页 | WAP网站噩梦来临 >> 收藏此页到：[ 天极网摘 ] [ 网摘中国 ] [ 5Seek ] [ 我评网摘 ] [ 狐摘 ] [ 365Fav ] 通过AT命令与手机互动开发指南(二) 通过AT命令与手机互动开发指南二 手机状态读取 1、 Phone activity status +CPAS 电话活动状态 : 0 ready (ME allows commands from TA/TE) 准备好状态（移动终端可以处理从设备终端发送过来的命令） 1 unavailable (ME does not allow commands from TA/TE) 不可获得状态（移动终端不可以处理从设备终端发送过来的命令） 2 unknown (ME is not guaranteed to respond to instructions) 未知状态（移动终端不保证响应指示） 3 ringing (ME is ready for commands from TA/TE, but the ringer is active) 响铃状态（移动终端可以处理从设备终端发送过来的命令，手机正在响铃） 4 call in progress (ME is ready for commands from TA/TE, but a call is in progress) 呼叫状态（移动终端可以处理从设备终端发送过来的命令，手机正在呼叫） 5 asleep (ME is unable to process commands from TA/TE because it is in a low functionality state) 睡眠状态（移动终端不可以处理从设备终端发送过来的命令，因为它处于低功能态） also all other values below 128 are reserved by this ETS 2、 Battery charge +CBC 手机电池电量 : 0 ME is powered by the battery 移动终端由电池供电 1 ME has a battery connected, but is not powered by it 移动终端有连接电池，但是不是由它供电 2 ME does not have a battery connected 移动终端未有连接电池 3 Recognized power fault, calls inhibited 不可识别错误，限制呼叫 : 0 battery is exhausted, or ME does not have a battery connected 电池耗尽，或者移动终端没有连接电池 1...100 battery has 1-100 percent of capacity remaining 电池电量百分比 3、 Signal quality +CSQ 手机信号质量 : 0 -113 dBm or less 1 -111 dBm 2...30 -109... -53 dBm 31 -51 dBm or greater 99 not known or not detectable (in percent): 0...7 as RXQUAL values in the table in GSM 05.08 [20] subclause 8.2.4 99 not known or not detectable Trackback: http://tb.blog.csdn.net/TrackBack.aspx?PostId=535597 刺客长白 发表于 2006-01-10 21:54 | 编辑 | 引用(0) 评论