Step@88

Step@88 Email/Msn/GTalk:fxlzju@gmail.com << objdump nm 命令 | 首页 | gcc 做了些什么... >> 2007-12-21 ld script 脚本浅析 ld 大家可能都比较熟悉,但是ld 的脚本可能大家接触的会比较少,一般情况下ld 会自动调用默认的ld脚本. 可以通过 ld -verbose 来显示,如下: 1. OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") OUTPUT_ARCH(i386) ENTRY(_start) SEARCH_DIR("/usr/i486-linux-gnu/lib32"); SEARCH_DIR("/usr/local/lib32"); SEARCH_DIR("/lib32"); SEARCH_DIR("/usr/lib32"); SEARCH_DIR("/usr/i486-linux-gnu/lib"); SEARCH_DIR("/usr/local/lib"); SEARCH_DIR("/lib"); SEARCH_DIR("/usr/lib"); SECTIONS { /* Read-only sections, merged into text segment: */ PROVIDE (__executable_start = 0x08048000); . = 0x08048000 + SIZEOF_HEADERS; .interp : { *(.interp) } .hash : { *(.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } .gnu.version_d : { *(.gnu.version_d) } .gnu.version_r : { *(.gnu.version_r) } .rel.dyn : { *(.rel.init) *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) *(.rel.fini) *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) *(.rel.ctors) *(.rel.dtors) *(.rel.got) *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) } .rela.dyn : { *(.rela.init) *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) *(.rela.fini) *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) *(.rela.ctors) *(.rela.dtors) *(.rela.got) *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) } .rel.plt : { *(.rel.plt) } .rela.plt : { *(.rela.plt) } .init : { KEEP (*(.init)) } =0x90909090 .plt : { *(.plt) } .text : { *(.text .stub .text.* .gnu.linkonce.t.*) KEEP (*(.text.*personality*)) /* .gnu.warning sections are handled specially by elf32.em. */ *(.gnu.warning) } =0x90909090 .fini : { KEEP (*(.fini)) } =0x90909090 PROVIDE (__etext = .); PROVIDE (_etext = .); PROVIDE (etext = .); .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } .rodata1 : { *(.rodata1) } .eh_frame_hdr : { *(.eh_frame_hdr) } .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) } .gcc_except_table : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) } /* Adjust the address for the data segment. We want to adjust up to the same address within the page on the next page up. */ . = ALIGN (0x1000) - ((0x1000 - .) & (0x1000 - 1)); . = DATA_SEGMENT_ALIGN (0x1000, 0x1000); /* Exception handling */ .eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) } .gcc_except_table : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } /* Thread Local Storage sections */ .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) } .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) } .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); } .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT(.init_array.*))) KEEP (*(.init_array)) PROVIDE_HIDDEN (__init_array_end = .); } .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(.fini_array)) KEEP (*(SORT(.fini_array.*))) PROVIDE_HIDDEN (__fini_array_end = .); } .ctors : { /* gcc uses crtbegin.o to find the start of the constructors, so we make sure it is first. Because this is a wildcard, it doesn't matter if the user does not actually link against crtbegin.o; the linker won't look for a file to match a wildcard. The wildcard also means that it doesn't matter which directory crtbegin.o is in. */ KEEP (*crtbegin*.o(.ctors)) /* We don't want to include the .ctor section from the crtend.o file until after the sorted ctors. The .ctor section from the crtend file contains the end of ctors marker and it must be last */ KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) } .dtors : { KEEP (*crtbegin*.o(.dtors)) KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) } .jcr : { KEEP (*(.jcr)) } .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) } .dynamic : { *(.dynamic) } .got : { *(.got) } . = DATA_SEGMENT_RELRO_END (12, .); .got.plt : { *(.got.plt) } .data : { *(.data .data.* .gnu.linkonce.d.*) KEEP (*(.gnu.linkonce.d.*personality*)) SORT(CONSTRUCTORS) } .data1 : { *(.data1) } _edata = .; PROVIDE (edata = .); __bss_start = .; .bss : { *(.dynbss) *(.bss .bss.* .gnu.linkonce.b.*) *(COMMON) /* Align here to ensure that the .bss section occupies space up to _end. Align after .bss to ensure correct alignment even if the .bss section disappears because there are no input sections. FIXME: Why do we need it? When there is no .bss section, we don't pad the .data section. */ . = ALIGN(. != 0 ? 32 / 8 : 1); } . = ALIGN(32 / 8); . = ALIGN(32 / 8); _end = .; PROVIDE (end = .); . = DATA_SEGMENT_END (.); /* Stabs debugging sections. */ .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } .stab.excl 0 : { *(.stab.excl) } .stab.exclstr 0 : { *(.stab.exclstr) } .stab.index 0 : { *(.stab.index) } .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } /* DWARF debug sections. Symbols in the DWARF debugging sections are relative to the beginning of the section so we begin them at 0. */ /* DWARF 1 */ .debug 0 : { *(.debug) } .line 0 : { *(.line) } /* GNU DWARF 1 extensions */ .debug_srcinfo 0 : { *(.debug_srcinfo) } .debug_sfnames 0 : { *(.debug_sfnames) } /* DWARF 1.1 and DWARF 2 */ .debug_aranges 0 : { *(.debug_aranges) } .debug_pubnames 0 : { *(.debug_pubnames) } /* DWARF 2 */ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } .debug_abbrev 0 : { *(.debug_abbrev) } .debug_line 0 : { *(.debug_line) } .debug_frame 0 : { *(.debug_frame) } .debug_str 0 : { *(.debug_str) } .debug_loc 0 : { *(.debug_loc) } .debug_macinfo 0 : { *(.debug_macinfo) } /* SGI/MIPS DWARF 2 extensions */ .debug_weaknames 0 : { *(.debug_weaknames) } .debug_funcnames 0 : { *(.debug_funcnames) } .debug_typenames 0 : { *(.debug_typenames) } .debug_varnames 0 : { *(.debug_varnames) } /DISCARD/ : { *(.note.GNU-stack) } } 从上面可以看出ld script的一个大概框架 build-in function SECTIONS{} 两部分在组成,其实还有一些其他的命令如 MEMOR,PHDRS,VERSION等。 2. 一些内建函数 OUTPUT_FORMAT 文件输出的格式 OUTPUT_ARCH 输出的体系平台 ENTRY 指定开始执行的段或者地址. 一般情况下它按照下面这样的次序来决定start 1 ld -e 指定 2 ENTRY 3 start符号的地址 4 .text 段的开始 5 0x0 INPUT_FILE 可以输入xx.o 文件 或者 -lxxx 库文件 SEARCH_DIR 库文件的搜索路进 PROVIDE 定义的变量 如果源文件中已经定义值 那么用源文件中的,如果没有定义则用脚本中定义的。 ADDR 表示取当前地址 KEEP 表示要保留此段 3. sections 命令 sections 段主要包括一些段的输出指定 如 .init .text .data .rodata .bss .ctors .dtors 以及其他调试,符号表信息 ,relocate 地址表信息 各section之间可以定义变量,这里需要说明的是 . 号表示当前的vma section 的格式如下 section [address] [(type)] : [AT(lma)] [ALIGN(section_align)] [SUBALIGN(subsection_align)] { output-section-command output-section-command ... } [>region] [AT>lma_region] [:phdr :phdr ...] [=fillexp] address 可以指定vma的地址,AT 可以指定 lma的地址, vma 表示虚地址也是执行地址, lma表示载入的地址。 一般情况下相同。 现面可以看一个简单的示例: SECTIONS { . = 0x10000; .text : { *(.text) } . = 0x8000000; .data : { *(.data) } .bss : { *(.bss) } } 这里表示将所有的的.text以0x10000 开始,而 .data 以0x8000000开始 .bss 在.data后面 4. 其他信息 还有一些其他信息 如 MEMORY ,PHDRS ,VERSION 可以详细看ld的文档 5. 参考 1. man ld 2. ld 在线手册 相关文章: objdump nm 命令 2007-12-19 Latex 安装和使用以及中文问题 2007-05-27 autotoolset使用(3) 2007-05-25 autotoolset使用(2) 2007-05-22 走过来了 2006-04-05 收藏到: Del.icio.us Tag: linux&unix 引用地址: step 发表于 23:00:21 | 编辑 | 继续话题 | 转发 | 推荐 发表评论

原始快照:web.archive.org